J/88 Class Association

Mast, Boom and Rigging (USA)

This page is under construction ... click on area of drawing to get a more detailed drawing or pull up a link to a part.


(this is going to take a while ...)


Parts List:
Description Part # Qty
Mast

Section Hall Carbon 135C 1

13 mm AA Drill/Tap CB Track Harken AA Track ~36.82'
11223mm
Track Screws #8 FH in or 4 FH mm 225?

Spreaders (upper - Port) Hall 1
Spreaders (upper - Stbd) Hall 1
Spreaders (lower - Port) Hall 1
Spreaders (lower - Stbd) Hall 1
Spreader Bar (upper) Hall 1
Spreader Bar (lower) Hall
1
Spreader End Plate Hall 4
Spreader End Plate Screws Hall 8
Backstay Clevis Pin 1
Main Halyard Sheave 2
Spinnaker Halyard Sheave 1
Spinnaker Halyard Chafe Gear
Hall PR-10836-93D 1
Mast Top Cap, 135C , 1 SHV Hall PR-10836-93C 1
Jib Halyard Sheave 1
Halyard Sheave Pins 4
Halyard Sheave Pin Screws 4
Mast BottomPlug Hall 1
Mast Bottom Plate Hall 1
Mast Deck Plate Hall 1
Mast Deck Plate Bolts 2
Mast Bottom Plub Bolt 1
Boom

1

Section Hall H104 Aluminum 1
End Sheave (Outhaul and Reef)
End Sheave Pins
Standing Rigging
Headsay

6mm compact brd

39' 4 1/2"
12000 mm

Headstay Lower Pigtail

6mm compact brd

' 9"
533 mm

Cap Shrouds (Upper/V1)

6mm compact brd

39' 4 3/8"
11996 mm

Intermediate Shrouds (D2)

5mm compact brd

26' 10 1/2"
8192 mm

Lowers Shrouds (D1)

6mm compact brd

14' 5/1/4"
4401 mm

Backstay 6mm dsk78 Ultra wire 39' 0 1/2"
11900 mm
Rubber Stoppers (V1 & D1)

4

Rubber Stoppers (D2)

2

Turnbuckle Studs (V1 & D1)

4

Tuurbucke Studs (D2)

2

Turnbuckle Barrels

6

Optional wrenches for Turbuckles

(see this page)

 

Please help keep this page up to date.

Click here to submit correction or addition..